索尼RC-S462B,SONYRC-S462C读卡器

使用微信扫描二维码分享朋友圈，成交更快更简单！

索尼RC-S462B,SONY RC-S462C读卡器


索尼Felica Reader RC-S492B/S462B/S462C

Overview
The reader consists of a control board, an antenna and a cable between them. The reader
communicates with the IC card or device after receiving a command from the controller.
FeliCa adopts ISO/IEC 18092-compliant communication protocol. The communication distance between the reader and the IC card or device depends on the antenna.
This highly-secure ASIC chip actualizes data processing and performs the functions necessary for an encryption and encoding/decoding circuit within a single chip.
New applications on the controller can be developed using the reader/writer commands.
An optional software development kit (SDK for FeliCa) is available as an application development tool (for Windows only).
Features
Sophisticated functionality & high-speed processing
In addition to command conversion and authentication between a controller and an IC card or a device, and high-speed encryption/decryption of data communication, the reader also has a self-diagnostic function.

Flexible system settings
System settings or changes, or both, can be made to the mutual authentication, authentication keys, data-transfer speed with the controller and switching of encryption during data transfer.

High-speed communication (424kbps)
The reader is capable of high speed communications and supports the transfer rate of 424kbps*, in addition to the conventional data transfer rate of 212kbps.

* Available only when the card or device to be used is compatible with the 424kbps transfer mode.

Specifications
RC-S492B RC-S462B RC-S462C
External appearance


Communication distance (*1) 30mm (when using RC-S860series / RC-S880) 100mm (when using RC-S860 series / RC-S880)*2
Communication method Compliant with ISO/IEC 18092
(212kbps Passive communication mode) Compliant with ISO/IEC 18092
(212kbps / 424kbps Passive communication mode)
Communication speed 212kbps 212kbps,424kbps (*3)
Carrier frequency 13.56MHz
Modulation bandwidth ± 300kHz (at -30dB carrier level)
Electric field strength 300μV/m or less (at 10m distance) 4500μV/m or less
(at 10m distance)
Operating temperature/humidity
(non condensation or icing) -10℃～+40℃ / 20% RH～90%R H
40℃～60℃ / 50% RH or less
Storage temperature/ humidity
(non condensation or icing) -30℃～+70℃ / 60% RH or less
External interface Serial (CMOS 5V) RS-232C or RS-485A (cannot use both at same time)
DF1E-10P-2.5DS(0.5) (right-angle, tin-plated) 10-pin interface connector manufactured by Hirose Electric Co., Ltd.
Communication speed (with controller) 7.20k～1228.8kbps (RS-232C is max 115.2kbps)
Mass Approx. 40g Approx. 50g Approx. 150g
Dimensions
(W*H*D) Control board Approx. 60mm×15mm×50mm Approx. 104mm×10mm×67mm
Antenna Approx. 50mm×6mm×25mm Approx. 104mm×6.15mm×67mm
Antenna cable length Approx. 120 mm
Power voltage, current (typical) DC5V,100mA and DC12V,60mA DC12V,140mA DC12V,320mA
*1 Communication distance depends on the peripheral environment. Under ideal conditions, this value is not affected by electromagnetic waves or metallic substances.
*2 Depending on the usage environment, the polling success rate may deteriorate even in the vicinity (approx.7mm) of the antenna.(RC-S462C series only)
*3 Available only when the card or device to be used is compatible with the 424kbps transfer mode.
● This product complies only with the radio laws in Japan because it was designed for uses in the Japanese market.
Customers should ensure that the finished product incorporating this reader product complies with the radio laws of the country where the product is to be used.